|
Configuring the EtherJet adapter
to work with IEEE802.3
Question:
How can I configure the EtherJet adapter to work with IEEE802.3? It works
for Standard Ethernet, but not for IEEE802.3. I have checked the entire
manual that comes with the card, the Windows 95 configuration screens,
LANAID, and the forums. My network is IEEE802.3 and is required by my customer.
Answer:
One way I have been able to get the adapter to use 802.3 is by booting
to the lanaid diskette. At that point you come to a lanaid c prompt and
you can type /ether8023. Also you can type
/help and it will show you all of the parameters that can be used.
Question:
We are running LANAID 1.0, which came with the Adapter. The /help does
not list an /ether8023 command, and when executed, generates a warning.
Needless to say, I still cannot run with IEEE802.3.
Answer:
You can download the file etijo2.exe from the IBM bbs at 919-517-0001.
The file is in the reference disk area of the bbs. This lanaid v1.03 that
will allow you to set the frame type. |
|